electroplating power supply 5000A/15VDC for electroplating rectifier for plating

electroplating power supply 5000A/15VDC for electroplating rectifier for plating

Model No.︰5000A/15VDC

Brand Name︰SANDI

Country of Origin︰China

Unit Price︰US $ 8000 / pc

Minimum Order︰1 pc

Inquire Now

Product Description

electroplating power supply 5000A/15VDC for electroplating

rectifier for plating


The basic knowledge on the switching power supply:

      The switching power supply is a kind of power conversion equipment, it uses the semiconductor power device as the switching element, adopts the closed loop control mode, possesses the function of automatic protection and realize the power conversion. The main feature is that the main circuit works in on-off state with a high switching frequency.

Electrical parameters of 5000A-12V power supply

Input Voltage

3-phase AC380V±10%,50HZ.

Input Current


Input Power


Output Power


Output Voltage


Output Current


Voltage Regulation


Current Regulation


Rated efficiency


Power factor


Ripple coefficient


Output waveform

High frequency pulse square wave

I/O Interface

RS485 (must be specified when ordering)

Operating environment


Storage temperature


Insulation resistance


Input - output:>5MΩ;

Input - housing:>5MΩ;

Output - housing;>5MΩ;

Insulation strength

Input - output:AC1500V,10mA, one minute;

Input - housing:AC1000V,10mA, one minute;

Insulation class

Class B

Protection degree


Cooling system

Forced air-cooled

Operating condition

24-hour operation at full load

Protection mode

Prompts for phase failure, overheating, overcurrent and fault protection.

Service environment

   1. Altitude: No higher than 1000m.

   2. Relative humidity: the max. monthly average relative humidity is 90%, and the min. monthly average relative humidity is 15%.

   3. The ambient temperature should not exceed the following limits:

       (1) Max. ambient air temperature: 40

       (2) Monthly average ambient air temperature: 35

       (3) Min. ambient air temperature: -15

   4. The equipment should be installed in places without strenuous vibration or jolt and free from inflammable, explosive or strong corrosive medium that severely influences the normal operation of the product.

   5. The equipment shall not be used outdoors unless protective measures are taken.

Price Terms︰ FOB Shanghai, Ningbo

Payment Terms︰ TT

Lead Time︰ 12 days

Standards Certificate︰ CE, ISO9001

Product Image