Product Description

SDP-50KW Outdoor & Waterproof IP54 Pure sine wave

off grid inverter CSA/UL approved

 

SANDI SDP series Low Frequency Off Grid Pure Sine Wave Inverter is one of the most advanced DC to AC conversion products in the world. It’s widely used for solar energy, wind turbine andother renewable energy systems, also suitable use in the mountains, pastoral, border, island, 

vehicles, ships and other areas without electricity which can provide and guarantee effective 

power supply. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, high efficiency, low no-load loss and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners,electric 

motors, refrigerators, fluorescent lights,televisions,electric fans and other industrial power supply.

 

Technical Features:

1, Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.

2, Intelligentized, modularized, simple structure design easy to maintenance.

3, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.

4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.

5, The output frequency can be setting via LCD panel, it’s very convenient for customer.

6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.

7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.

8, Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.

9, Built-in low frequency isolation transformer, strong impact resistance, available with motors, pump, air conditioners and other high impact equipment. At the same time DC busbar and AC busbar are completely isolated to avoid interference.

10, Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy.

11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.

12, Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.

13, European CE (EMC, LVD) certificate, accredited by Australian CEC, ERAC energy network.

[Optional]

RS485/CAN;

Can add AC bypass input complementary function;

 

Technical Parameter                         

Model	SDP-40KW		SDP-50KW
Isolation mode	Low Frequency Transformer
DC Input
Rated voltage (Vdc)	360Vdc	384Vdc	360Vdc		384Vdc
Rated current (A)	111A	104A	139A		130A
Input voltage range (Vdc)	324~480V	345~550V	324~480V		345~550V
AC Output
Rated power (Kw)	40KW		50KW
Rated voltage	220V±3%	380V±3%	220V±3%		380V±3%
Number of phases	1 phase 2 wire	3 phase 4 wire	1 phase 2 wire		3 phase 4 wire
Rated current (A)	182A	60A	227A		76A
Rated output voltage range (V)	220/230/240/380/400/415/440/480VAC (optional)
Output frequency	50Hz or 60Hz ±0.05 (Can set)
Waveform	Pure sine wave
Waveform distortion rate (THD)	Linear load≤3%
Dynamic Response time (Load 0←→100%)	5%, ≤50ms
Power Factor (PF)	0.99
Inverter Efficiency	>93%
Electrical insulation properties	2000Vac、1 Minute
Protection Function
Overload Ability	120%、30s
Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
Display	LCD
Communication interface (optional)	RS485 or CAN (optional)
Method of working	Working continuously
Cooling method	Fan-cooled
Short-circuit protection	No automatic recovery, need to restart the machine
Working Environment & Mechanical dimension
Degree of protection	IP54 (indoor/Outdoor)
Working Altitude（m）	≤3000m
Working temperature (℃)	-20～+50℃
Relative humidity (℃)	0~90%, No condensation
Noise ( 1 meter)	≤60dB
Unit size: (W x D x H)	750×650×1200mm
Reference weight(Kg)	320Kg			360Kg
Our company can adjust parameter configuration according to user’s requirement.

Price Terms︰ FOB Ningbo

Payment Terms︰ TT

Lead Time︰ 20 days

Standards Certificate︰ CE, ISO9001, CSA, UL, CCS

Product Image